Carrier cares about your comfort. Although we cannot immediately respond to your cleaning requirements because of the constraints of the enhanced community quarantine, we have prepared a that will guide you through the steps to clean your AC filters and help ensure your AC continues to efficiently cool you until the time when one of our professional service technicians can get to you.
What are the things you need to prepare?
- Medium-sized basin
- Soft Cloth
Carrier Window Type Air Conditioner DIY Cleaning
Always make sure that everything is safe. Turn off your Window Room Aircon using the remote or the knob and remove the plug from the power outlet.
Step 1: Press the metal casing
Step 2: Gently remove the front grille. If you have a top vent window unit unscrew the front grille before removing it.
Step 3: For remote-control models, press the connector to disconnect the wiring.
Step 4: Pull the air filter out.
Step 5: Remove the special air filters, shake off the dust then set aside. This step is applicable for A/C units with special filters.
Step 6: Soak the main filter in the basin of water for five to ten minutes.
Step 7: Shake the main filter lightly to remove the excess water.
Step 8: Place the main air filter on top of a dry cloth and allow it to dry.
Step 9: While waiting for the main air filter to dry, clean the A/C unit’s fin with a vacuum cleaner. Ensure that the tip of the vacuum won’t touch the fins to prevent any damage. If you don’t have a vacuum at home, you may skip this step.
Step 10: Clean the aircon front grille using a soft dry cloth.
Step 11: Once the main air filter is dry, put the special filters back in the slots.
Step 12: Insert the filter back into the front grille.
Step 13: Plug the plastic connector gently. *For remote-control units only.
Step 14: Attach the front grille back on to the unit. If your aircon unit is top vent, please screw the front grille back carefully.
Step 15: Plug the unit back on to the power outlet and you’re all set!
You can watch the full DIY Widow aircon video tutorial at https://youtu.be/2cBnQHEjuD8
Carrier Split Type High Wall DIY Cleaning
Your safety is our priority. Before starting your DIY cleaning, switch off your split type aircon using its remote control.
Step 1: Gently lift the front panel.
Step 2: Carefully slide out the main air filter.
Step 3: Slide out the special air filters. Shake off the excess dust then set aside.
Step 4: Soak the main air filter in a basin of water for five to 10 minutes.
Step 5: Lightly shake the main air filter to remove the excess water.
Step 6: Place the main air filter on top of a dry cloth and allow it to dry.
Step 7: While waiting for the main air filter to dry, clean the A/C unit’s fin with a vacuum cleaner. Ensure that the tip of the vacuum won’t touch the fins to prevent any damage. If you don’t have a vacuum at home, you may skip this step.
Step 8: Clean the front panel with a soft dry cloth.
Step 9: Slide in the special air filters back in the slots.
Step 10: Slide the main air filter back in.
Step 11: Attach the front panel on to the aircon unit. Then, switch on your split type aircon and you’re done!
You can watch the full DIY Split type aircon video tutorial at https://youtu.be/mMXWkfNSUHQ
Once the quarantine has been lifted, we encourage you to book a cleaning service with us on https://carrier.com.ph/book-a-service/ that we can provide you with a more thorough cleaning of your unit. Thank you for your patience and understanding during this challenging time. We hope you stay safe and healthy.